Choosing the Right Window Handle For Your UPVC Window
Choosing the right window handle is vital to having a properly-fitting uPVC window. You'll require a style that is not only functional but also complements the aesthetics of your home.
It is simple to change the uPVC handle. It takes only just a few minutes and the tools below.
Metal
Metal window handles are both a decorative piece and an essential hardware item to increase the security of your home. There are a range of window handle designs made of metal that can be customized to different frames and materials. Some of these handle designs are specifically created for sash windows, to make the process of opening and closing the window smoother and less likely to get jammed. There are a number metal locking mechanisms that stop the window from opening beyond the point at which it is safe to open.
Espag handles are probably the most recognised type of window handle used on UPVC windows. They have a spindle mental on the back that is fixed to the window frame, driving the window mechanism. They are available on both UPVC and aluminium windows.
Cockspur handles are a different type of window handle, typically found on older UPVC windows. These handles are more difficult than modern Espag handles because they use a traditional peg-locking mechanism.
For a sleeker look There are cam handles available. They have a sleek edge and are designed to be compatible with other types of uPVC windows. They are ideal for tilt and turn windows where it is possible to open the window from the bottom while allowing the top of the window to be opened.
It is important to take several aspects into consideration when selecting new window handles made of metal such as step height and the direction in which the handle rotates. The first refers to the distance between the underside of the handle nose and the base of the screw plate, while the latter is which direction the handle will be able to rotate. Some handles are able to rotate in one direction, for example clockwise. Others can only rotate in the opposite direction.
Plastic
There are a variety of window handles made of plastic. All are designed to operate windows and secure them from invaders. They can be installed on either uPVC or aluminium windows, and come in a variety of styles and colors. Some windows are also designed to have a lock built in. This gives added security and lets you open the window while protecting it from burglars.
Different situations can trigger window handle issues. Sometimes they may simply not be able to rotate properly. This could be due to dust entering the mechanism, which causes dirt or blocking. Another issue that is common is when the window handle begins walking tightly or clings to something. This is an indicator that the window handle requires attention.
It's important to contact an expert when this happens. They can help you resolve the problem quickly and effectively. They can also provide advice on replacing a window handle made of plastic with an alternative that will function better and more effectively.
Whatever type of handle you're using, most manufacturers will utilize the same fasteners. This means it's easy to replace your window handle and lock with a perfect match.
It's important to understand the dimensions and style of your existing window before you search for an appropriate replacement handle. door handle repairs near me will help you find the right handle that will fit your windows perfectly and won't cause any issues. Also, be sure to be aware of the length of the spindle - this refers to how far the handle's nose extends out from the base. This is an important factor if you want to use your new window handle with a restrictor installed.
Casement
Casement windows are hinged on top and bottom like awning windows. They open horizontally to the left or right, instead of vertically. They are also easier to clean and offer a stunning view of your backyard or garden, in addition to permitting fresh air to enter. They're a popular option for new construction and they can add an architectural element to older homes, too. Over time, they can become difficult to open and close due to worn-out equipment or worn out gears. In some cases, window professionals may need to replace the crank mechanism.
Casement windows, also known as awning windows, typically come with a roto-gear or crank mechanism that allows the window to be opened and closed however, they also have an locking mechanism that keeps the sash in place when closed. The lock on a awning window works with the bezel locks to secure the window. Many people overtighten their window's operating handle. This can cause the locking mechanisms to work against one other, causing windows to become tangled and not close or open properly.
Over time, the window crank handle can also become stripped. This can happen when the window is shut and opened repeatedly over a long period of time. It could also happen when the window was used as a prop while it was opened which caused the handle to rub against and damage the crank shaft or gears.
Replacing a window with a casement or an awning window crank is an easy DIY window repair. It could save you money over time. The first thing you'll have to do is locate the screws used to mount the trim that keep the casement cover in place (Photo 3). After removing the screws, you can take off the handle from the previous one and inspect the crank mechanism. The gears can sometimes be reflubricated, but if already worn out, it's time for a replacement.
Cockspur
Cockspur handles are typically found on older uPVC windows and doors, as well as timber and aluminum. These handles are easy to use, lock with a key and provide protection against cold and noise from the outside. The handle opens outwards by pulling down on the lever and the cockspur nose shuts over a wedge striker within the frame to seal the window when closing. Replacing both the handle and cockspur wedge strikes can make your double-glazed windows much more efficient, and also increase security.
The replacement cockspur handles are available for left and right-handed windows and can be operated by turning them 90degrees. The handles come with a small spur that presses against the PVC wedge of the window frame in order to create a secure closing. The handles are simple to fit and come in various finishes, including white, black satin chrome, and PVD gold.
Measuring the backset of a cockspur handle can be a challenge, particularly when you're replacing a handle. This handle was designed to solve this problem and features three packers of various thicknesses which can be fitted on the side of the handle's nose to provide a variety of backset step heights, including 9mm 13mm, 17mm, and 21mm.
The Schlosser Technik apto is a high-quality replacement cockspur that has flexible screw fixing centers. It can be used for many applications between 9mm to 21mm. It is also simple to install with key locking and is available in various finishes.
This handle can be used to windows that tilt and turn but not side opening casement windows (which have a pivot that is separate from the turn and tilt). This handle can be used to replace damaged or old handles on uPVC and aluminium frames by using rivets instead of screws. You'll need an rivet gun and rivets to fit this handle to your window frame.
Espagnolette
Espagnolette window handles, also referred to as espagnolette locks or shootbolts are the locking mechanism that connects to the multi-point lock system within your uPVC windows. These are typical in older homes and provide both aesthetics and security. Espagnolette handles are available with key-locking or non-key lock mechanisms, and are available in both inline and crank designs. They can be straight or curving. The key-locking button provides an extra layer of security that prevents the handle from being opened from the outside using a thin screwdriver stuck between the frames. This is a typical burglary technique!
GB DIY Store offers a large selection of handles that are espagnolette. It is crucial to measure the spindle size of the handle you currently have before ordering a replacement. Once you've done this, browse through our range of espag replacement handles to find the ideal style for your windows.
We have a wide selection of white uPVC handles that have key locking and non-key locking options. They come in various colours and spindle lengths, so you can match your new handles to the existing window frame and decor. Our espagnolette handle collection includes classic and modern designs as well as contemporary styles. Each replacement handle is supplied with 5 interchangeable magnetic spindle sizes ranging from 15mm and 55mm, so you can easily attach the handle to your windows without needing to purchase the correct screw size!
A clever rose on the back of the rose makes sure that the spindle fits in the correct spot and is only inserted by using the left or right hand lever, avoiding any incidents. A metal spindle is also used to secure the handle of an espagnolette. The handle is held in place using an innovative mechanism called a click-fit which is activated by rotating the handle with a finger and it emits an audible "click".